GEOTHERMAL HEATING-THE ULTIMATE RELIABLE RESOURCE


In the past few years heating and cooling costs have increased substantially.  More and more people are now looking to alternative methods for heating and cooling their home.  If you are looking to conserve energy and save money on your heating and cooling bills, then say hello to geothermal energy. 

There are four types of installations to choose from depending upon your local ordinances and space requirements. There are closed loop pipe configurations such as Horizontal Vertical, and Pond installations and an open loop Hybrid installation.

Horizontal Loop Installation

Horizontal loop installations are becoming more common as they are considered the most cost-effective when space is available and trenches are easy to dig.  If space is an issue in your area then vertical loop installations should be considered. 

Vertical Loop Installation

This is done by having your contractor dig vertical holes in the ground from a range of about 150 to 450 feet deep into the Earth.  Each of these holes would then contain a single loop of pipe. The holes are then backfilled to create better conductivity.  A series of piping configurations then return back to the geothermal heat pump.  Vertical loops are generally more expensive to install, but require less piping than horizontal loops.   

Pond Loop Installation

Another option would be to connect the geothermal heat pump system to an existing well or water source.  If you happen to live by a larger water source, contractors can also coil up tubing, tie it to some concrete blocks and then sink it underwater.

Open Loop Hybrid

A Hybrid geothermal heat pump is especially efficient when relying on cooling needs more so than heating. Hybrid systems use a combination of cooling columns and outdoor air technology. Ground water is drawn up through standing columns in one direction through the heating pump units and then dissipates to the outside.


We welcome you to browse Conditioned Air to find out more information on how you can reduce your traditional heating and cooling bills by up to 70 percent.  We’ve been servicing the Southwest Florida area since 1962.  

Comments

Popular posts from this blog

Navigating the Road Map to a more Successful and Fulfilling Career

The Big Picture of Conversion Rate Optimization

The Evolution of Wireless Technology-Past, Present and Future